-
Principle of system leakage detection
Jun 18 , 2020
Most technicians are very familiar with the GFCI sensor for ground fault current detection.The detection principle is as follows: In a three-phase system, a chip-type RCMU (leakage current monitoring unit) is placed on the bus. The most important thing is that all three buses pass through the middle hole of the RCMU randomly. The illustrated system does not have a neutral line and is a three-phase...
Read More
-
The Function of Current Transformer and How to Handle Its Common Malfunction
Jun 17 , 2022
The current transformer is based on the electromagnetic inductionprinciple. It is composed of closed iron core and winding. The turns of its first winding are very small, stringed in the circuit whose current needs to be measured. Thus, it is often flowed through by the full-load current of the line. The turns of its second winding are much than the former,&...
Read More
-
Analysis of Magnetization Curve of Ferrite Core for Transformer
Jun 18 , 2022
Ferrite is a material that is relatively cheap in magnetic materials, and has good magnetic permeability and magnetic saturation strength, so it is now used in many current transformers, and in open-close current transformers, it is often based on customers. Therefore, we choose ferrites of different materials, such as PC40 and high-conductivity ferrite. We know that PC40 has a certain magnetic pe...
Read More
-
The ratio difference, angle difference of the transformer and the safety on the current transformer line
Jul 25 , 2022
Ratio difference: The fault of the transformer includes both the ratio difference and the angle difference. The ratio error is abbreviated as the ratio error, which is usually indicated by the symbol f. It is equal to the difference between the actual secondary current and the primary current converted to the secondary side and the ratio of the primary current converted to the secondary side. It i...
Read More