-
Leakage protection can save lives, The installation of this type of inductor must be clear
Jun 18 , 2022
1. Residual current transformer wiring Before installing the residual current transformer, it is necessary to identify the phase line, N line and PE line in the power network. The phase line and the N line should pass through the residual current transformer together as much as possible, and the PE line should not pass through the transformer. In the system software, if the N line does not pass th...
Read More
-
Analysis of Magnetization Curve of Ferrite Core for Transformer
Jun 18 , 2022
Ferrite is a material that is relatively cheap in magnetic materials, and has good magnetic permeability and magnetic saturation strength, so it is now used in many current transformers, and in open-close current transformers, it is often based on customers. Therefore, we choose ferrites of different materials, such as PC40 and high-conductivity ferrite. We know that PC40 has a certain magnetic pe...
Read More
-
Three main parameters that interfere with the accuracy of Rogowski coils
Jun 18 , 2022
Electronic current transformers are based on Rogowski coils with small size, light weight, wide frequency band, factors that more or less affect the accuracy of the coil in the measurement operation, such as the size of the circuit conductor under test relative to the coil, and external electromagnetic interference. , The circuit under test has the advantages of large conductor volume range, no ma...
Read More
-
Brief Introduction of Rogowski Coils, from Three Aspects
Jun 17 , 2022
What is the Rogowski coil? The Rogowski coil is a flexible clip-on hybrid inductor coil that can be easily coiled around a current conductor for measuring. It is capable of measuring large currents of several thousand amperes without expanding the size of the voltage transformer. Rogowski coils are electronic voltage transformers used to measure alternating currents such as fast transients, single...
Read More
-
Usage Principle of Current Transformer
Jun 17 , 2022
1)The wiring of the current transformer should follow the series principle: the primary winding should be connected in series with the circuit under test, while the secondary winding should be connected in series with all loadded instruments. 2)Selecting appropriate transformation ratio according to the measured current, otherwise the error will be larger. At the same time, one side of the se...
Read More
-
The Function of Current Transformer and How to Handle Its Common Malfunction
Jun 17 , 2022
The current transformer is based on the electromagnetic inductionprinciple. It is composed of closed iron core and winding. The turns of its first winding are very small, stringed in the circuit whose current needs to be measured. Thus, it is often flowed through by the full-load current of the line. The turns of its second winding are much than the former,&...
Read More
-
The basic concept of zero-sequence current protection
Mar 13 , 2022
The basic concept of zero-sequence current protection is based on Kirchhoff's current law: the algebraic sum of the complex currents flowing into any node in the circuit is equal to zero. When the line and electrical equipment are normal, the vector sum of the currents of each phase is equal to zero. Therefore, the secondary winding of the zero-sequence current transformer has no signal output, an...
Read More
-
Inspection of factory current transformers and resolution of abnormal instances
Mar 13 , 2022
1. Items to be checked when the current transformer is regularly inspected. How to correctly judge whether there is a fault and how to deal with it. What are the common faults of current transformers? Common faults of current transformers are: 1. The secondary side of the current transformer is open circuit 2. The temperature of the current transformer is too high during operation 3. There is smok...
Read More
-
Between short circuit and open circuit, these two transformers have different taboos
Mar 13 , 2022
Everyone knows that voltage transformers cannot be short-circuited, and current transformers cannot be open-circuited. Once the voltage transformers are short-circuited or the current transformers are open-circuited, they will destroy the voltage transformers or cause risks. In terms of structural design, we all know that both voltage transformers and current transformers are all transformers, but...
Read More