-
Brief Introduction of Rogowski Coils, from Three Aspects
Jun 17 , 2022
What is the Rogowski coil? The Rogowski coil is a flexible clip-on hybrid inductor coil that can be easily coiled around a current conductor for measuring. It is capable of measuring large currents of several thousand amperes without expanding the size of the voltage transformer. Rogowski coils are electronic voltage transformers used to measure alternating currents such as fast transients, single...
Read More
-
Three main parameters that interfere with the accuracy of Rogowski coils
Jun 18 , 2022
Electronic current transformers are based on Rogowski coils with small size, light weight, wide frequency band, factors that more or less affect the accuracy of the coil in the measurement operation, such as the size of the circuit conductor under test relative to the coil, and external electromagnetic interference. , The circuit under test has the advantages of large conductor volume range, no ma...
Read More
-
Analysis of Magnetization Curve of Ferrite Core for Transformer
Jun 18 , 2022
Ferrite is a material that is relatively cheap in magnetic materials, and has good magnetic permeability and magnetic saturation strength, so it is now used in many current transformers, and in open-close current transformers, it is often based on customers. Therefore, we choose ferrites of different materials, such as PC40 and high-conductivity ferrite. We know that PC40 has a certain magnetic pe...
Read More
-
Leakage protection can save lives, The installation of this type of inductor must be clear
Jun 18 , 2022
1. Residual current transformer wiring Before installing the residual current transformer, it is necessary to identify the phase line, N line and PE line in the power network. The phase line and the N line should pass through the residual current transformer together as much as possible, and the PE line should not pass through the transformer. In the system software, if the N line does not pass th...
Read More
-
Current transformer selection points
Jul 19 , 2022
Current transformer selection points: (1) The rated frequency of the current transformer should be consistent with the current frequency of the line under test. (2) Select the rated voltage of the current transformer according to the voltage level of the line under test to ensure the safety of the staff and the instrument. Never use a current transformer with a lower rated voltage to measure line ...
Read More
-
Overview of zero phase current transformers
Jul 19 , 2022
The zero phase current transformer is a line fault current monitor. Generally, there is only one iron core and secondary winding. When using, the primary three core cable is passed through the iron core window of the transformer, and the secondary wire is connected to a special relay, and then the output terminal of the relay is connected to a signal device or an alarm. system. Under normal circum...
Read More
-
Split core current transformer Structural characteristics and working principle
Jul 20 , 2022
1. Structural features Split core current transformer has a good design structure, beautiful appearance, and a transparent flip-top design for easy wiring. The shell material is made of PC/ABS alloy, which has the characteristics of high temperature resistance, high mechanical strength and environmental protection; the iron core is made of oriented cold-rolled silicon steel sheet, which has the ch...
Read More
-
The Difference of Zero Current Transformer and Current Transformer
Jul 21 , 2022
The zero current transformer is a current monitor of line fault. It has only one iron core and secondary winding. When it works, the primary three-core cable is passed through the iron core window of the transformer, and the secondary one is connected to the relay with lead wire, and then the output terminal of the relay is connected to the signal device or alarm system. Under normal circums...
Read More