-
Analysis of Magnetization Curve of Ferrite Core for Transformer
Jun 18 , 2022
Ferrite is a material that is relatively cheap in magnetic materials, and has good magnetic permeability and magnetic saturation strength, so it is now used in many current transformers, and in open-close current transformers, it is often based on customers. Therefore, we choose ferrites of different materials, such as PC40 and high-conductivity ferrite. We know that PC40 has a certain magnetic pe...
Read More
-
Current transformer selection points
Jul 19 , 2022
Current transformer selection points: (1) The rated frequency of the current transformer should be consistent with the current frequency of the line under test. (2) Select the rated voltage of the current transformer according to the voltage level of the line under test to ensure the safety of the staff and the instrument. Never use a current transformer with a lower rated voltage to measure line ...
Read More
-
Overview of zero phase current transformers
Jul 19 , 2022
The zero phase current transformer is a line fault current monitor. Generally, there is only one iron core and secondary winding. When using, the primary three core cable is passed through the iron core window of the transformer, and the secondary wire is connected to a special relay, and then the output terminal of the relay is connected to a signal device or an alarm. system. Under normal circum...
Read More
-
Split core current transformer Structural characteristics and working principle
Jul 20 , 2022
1. Structural features Split core current transformer has a good design structure, beautiful appearance, and a transparent flip-top design for easy wiring. The shell material is made of PC/ABS alloy, which has the characteristics of high temperature resistance, high mechanical strength and environmental protection; the iron core is made of oriented cold-rolled silicon steel sheet, which has the ch...
Read More
-
Fixation Mode of Split Core Current Transformer
Jul 21 , 2022
Split core current transformers are often used in equipment and have excellent induction effects, which can improve the use efficiency of equipment, have a good effect in controlling current, and complete the conversion of upper and lower voltages. How should we fix it in order to make it work smoothly and avoid vibration? ZTC will take you to understand. 1.Fixing with set screws: The set screws a...
Read More
-
The ratio difference, angle difference of the transformer and the safety on the current transformer line
Jul 25 , 2022
Ratio difference: The fault of the transformer includes both the ratio difference and the angle difference. The ratio error is abbreviated as the ratio error, which is usually indicated by the symbol f. It is equal to the difference between the actual secondary current and the primary current converted to the secondary side and the ratio of the primary current converted to the secondary side. It i...
Read More
-
Application analysis of leakage protection in electric vehicle charging pile
Jul 25 , 2022
As the world's largest consumer of new energy electric vehicles, new energy electric vehicles are developing rapidly, and the safety of electric vehicle charging piles is a top priority: whether the electric vehicle charging pile can avoid random plugging and unplugging during the charging process. The accident caused by the charging gun, whether it can be automatically powered off after charging,...
Read More
-
Leakage current generation classification
Jul 25 , 2022
Generally, there are four types of leakage currents: semiconductor component leakage current, power supply leakage current, capacitor leakage current and filter leakage current 1. Leakage current of semiconductor components The very small current that flows through the PN junction when it is turned off. D-S is forward biased, G-S is reverse biased, and after the conductive channel is opened, curre...
Read More